Green / red / blue / black / purple / gold film color glass / resin
lense coating machine
Optical Coater can coat multi-layers on viewing window or spectrum
element that applied to optical instruments optical lens. It is
suitable for coating antireflection coating, optical filter,
multicolor, red, yellow, green and blue on optics lens,
electronics, acrylic, glass, lamps, mobile viewing window, glasses,
Optical coating equipment can be plated layers more short pass,
long wave pass, antireflection film, reflective film, filter
membrane, beam splitter, a bandpass film, dielectric film, high
anti-film, color reflective film various film system , can achieve
0-99 layer film coating film system, but also to meet the
requirements as automotive reflective coating glass, binoculars,
glasses, optical lens, cold cups and other products. Configure
different evaporation sources, electron gun and ion source and a
variety of film thickness meter can be plated Department of metals,
oxides, compounds and other high melting membrane deposition, and
super-hard coating on the glass surface.
1. Our engineers are ready to provide custom made design and
recommendation for each customer's case.
2. We provide professional consulting service for PVD coaters and
3. We also have set up good relations with the suppliers of
relative consumables and parts for your needs
1. We will send the engineers to your place for installation, fine
tune and for operation training.
2. We will provide troubleshooting service all lifetime.
3. The warranty period of the machine is 1 year.
4. We will contact you to ask for about the conditions of the
machine in periodically.
5. We also provide the service for further extension on your
MODEL: OEC-l350 / USED: Optical Lens
Chamber Inner Size: Diameter1350×H1500mm
Vertical Front-Opening door
Vacuum Chamber Dome: 2 sets – 3 section
Heating: Halogen lamp:6KV
Chamber Material:SUS 304 Stainless Steel
Diffusion Pump:KT-630 (2 sets) 24”
Vacuum System: Roots Pump:ZJY-600(1 set)
Preceding Mechanical Pump:H-150(1 set)
Holding Pump:2X-30(1 set)
Note**(When the machine stops, the pump work 2 hours or so, to
protect the vacuum and the whole system,it also mechanical pump)
Ion Source: 1 set Model: CDNY-07LZ/2KW, Produced by Chendu Nanyi
Electronic Gun: model:JYK-HZ08 8/10KW
Quartz Crystal Control: SQC -310 Produced USAUNINFICON
Polycold Machine:Model:TH-135-12P, produce by Beijing Tiandi Jingyi
Technology Co., Ltd.
Vacuum Gauge: ZDF (Pirani-2ea, penning 1-ea), produced
Ultimate Vacuum: 6.0×10-4Pa
Working Vacuum: 2.0×10-2Pa
Static Leakage Rate: 0.67Pa/h
Cooling Mode: water circulation cooling
2 sets of control cabinets
Control Mode: touch Screen of 12 inches, color screen
PLC programmable from Mitsubishi of Japan.
Alarm and Protection Alarm for water shortage, over current, and
the over voltage and broken circuit protection, Perform the
corresponding Measures and
the function of electric interlock.
Other Parameters: Water Pressure: > 0.2 to 6 Mpa, 80 L/Min
Air Pressure: 0.4 to 0.6 Mpa
Power Supply: 220/380V,60Hz–60KV
Manual for each parts & components must have a manual of
operation and maintenance version in English.
Spare parts with the machine must supply the main necessary to
consumable of pieces that is change when is necessary when the
machine is on operation.
Tool Box: A complete set of tool to make maintenance